Table 1.1 | Physical Drives Required for Each RAID Level (Cont.) |
| | | |
RAID | Minimum # of | Maximum # of | |
Level | Physical Drives | Physical Drives | |
| | | |
1 | 2 | 2 | |
| | | |
5 | 3 | 32 | |
| | | |
10 | 4 | 16 | |
| | | |
50 | 6 | 32 | |
| | | |
1.5Benefits of the SAS Interface
SAS is a serial, point-to-point, enterprise-level device interface that leverages the proven SCSI protocol set. SAS is a convergence of the advantages of SATA II, SCSI, and fibre channel, and is the future mainstay of the enterprise and high-end workstation storage markets. SAS offers a higher bandwidth per pin than parallel SCSI, and improves signal and data integrity.
The SAS interface uses the proven SCSI command set to ensure reliable data transfers, while providing the connectivity and flexibility of point-to-point serial data transfers. The serial transmission of SCSI commands eliminates clock skew challenges. The SAS interface provides improved performance, simplified cabling, smaller connectors, lower pin count, and lower power requirements when compared to parallel SCSI.
The RAID controller leverages a common electrical and physical connection interface that is compatible with Serial ATA technology. The SAS and SATA II protocols use a thin, 7-wire connector instead of the 68-wire SCSI cable or 26-wire ATA cable. The SAS/SATA II connector and cable are easier to manipulate, allow connections to smaller devices, and do not inhibit airflow. The point-to-point SATA II architecture eliminates inherent difficulties created by the legacy ATA master-slave architecture, while maintaining compatibility with existing ATA firmware.
Benefits of the SAS Interface | 1-7 |
Copyright © 2006-2007 by LSI Corporation. All rights reserved.
