Figure 2.1 Example of MegaRAID Board Installation in a
PCI Express Slot
Bracket
Screw Press
Here
Press
Here
PCI Express Slot
Step 7. Configure and Install the SAS and/or the SATA II Devices in the Host Computer Case
Refer to the documentation for the devices for any preinstallation configuration requirements.
Step 8. Connect SAS and/or SATA II Devices to the Storage Adapter
Use SAS cables to connect SAS and/or SATA II devices to the MegaRAID 8480 Storage Adapter. Refer to Section 2.4, “SAS Device Cables” for SAS cable information. Refer to
Section 2.4.1, “Connecting the MegaRAID 8480 RAID Controller to Drive Boxes and Drive Expanders,” on page
MegaRAID 8480 Hardware Installation | |
| Copyright © |