Chapter 2
MegaRAID 8480
Hardware Installation
This chapter describes the procedures used to install the MegaRAID
8480 Storage Adapter. It consists of the following sections:
•Section 2.1, “Requirements”
•Section 2.2, “Quick Installation”
•Section 2.3, “Detailed Installation”
•Section 2.4, “SAS Device Cables”
•Section 2.5, “Replacing a Failed Controller Containing Data in the LSIiTBBU02”
•Section 2.6, “After Installing the Storage Adapter”
2.1Requirements
The following items are required for installation:
•A MegaRAID 8480 RAID Controller
•A host system with an available PCI Express expansion slot
•The MegaRAID 8480 CD, containing the drivers and documentation
•The necessary internal and/or external cables
•SAS or SATA II physical disks
Note: LSI strongly recommends using an uninterruptible power supply (UPS).
MegaRAID 8480 Storage Adapter User’s Guide |
Copyright ©