–A CD containing MegaRAID drivers for supported operating systems, an electronic version of this User’s Guide, and other related documentation
–A license agreement
–Warranty information
Step 2. Turn off the Power to the System
Review all safety information provided with the computer; then, turn off the computer, unplug the power cords from the power supplies, disconnect the computer from the network, and remove the computer cover. See the documentation provided with the computer for instructions. Before installing the controller, make sure that the computer is disconnected from the power and from any networks.
Step 3. Review the MegaRAID Controller Connectors
Refer to Chapter 3, “MegaRAID 8480 Storage Adapter Characteristics” for a diagram of the MegaRAID 8480 RAID controller with its connectors.
Step 4. Review the Controller Limitations
Review Section 1.2.1, “Controller Limitations” before you install the controller in the system.
Step 5. Check the Memory Module
Ensure that the memory module is present and seated firmly in the
Step 6. Install the MegaRAID 8480 Storage Adapter
Select a PCI Express slot and align the controller’s PCI Express bus connector to the slot. Press down gently but firmly to ensure that the card is properly seated in the slot. Secure the bracket to the computer chassis.
Figure 2.1 shows the installation of a RAID controller in a PCI Express slot.
Attention: To avoid damage to the computer, always remove the 8480 RAID Controller from the PCI Express slot before you relocate or ship the computer.
Detailed Installation |
Copyright ©