vThe CMDGRPS DD statement
Specify the affinity (command) types you want to see in the report. Only those affinity types listed on this DD statement are shown in the report. (The types correspond exactly to the type options on the CAFF02 screen.) You can specify any of the following affinity types, with each type on a separate line, starting in column one:
CANCEL | ENABLE | LOAD |
COLLECT | ENQ | PERFORM |
CREATE | EXTRACT | RESYNC |
CWA | GETMAIN | RETRIEVE |
DISCARD | INQUIRE | TS |
If you do not specify any affinity types on the CMDGRPS DD statement, or specify CMDGRPS DD DUMMY, all affinity types are selected for reporting.
The ®rst part of the report lists the affinity types selected.
v The TRANGRPS DD statement
Specify the name of the sequential data set where the basic affinity transaction groups are to be sent.
v The SYSPRINT DD statement
Specify the destination for the report.
Note: The Reporter cannot read records from the CAUAFF1, CAUAFF2, and CAUAFF3 VSAM ®les while the Detector has those ®les opened for update. Therefore, do not run the Reporter at the same time as the Detector.
Output from the Reporter
| For each affinity type speci®ed on the CMDGRPS DD statement, the Reporter |
| outputs each individual affinity both in report format and as de®nitions for basic |
| affinity transaction groups suitable for input to the Builder. |
| Notes: |
| 1. The Reporter outputs basic affinity transaction group de®nitions for |
| |
2. Transactions not initiated from a terminal do not appear in a basic affinity | |
transaction group. If none of the transactions in an | |
group were initiated from a terminal, a special reporting affinity relation of | |
Background is used; no basic affinity transaction group is created, and you | |
should ignore the affinity lifetime. |
42 CICS Transaction Affinities Utility Guide