CHAPTER 5 COMMAND REFERENCE
User's Manual U13502EJ2V0UM00
66
5.4.4 Supply Status
The [Supply Status] command checks the status of the target power supply (VDD). When this command is
executed, the status of the target is displayed in the log window.
Execute this command by selecting [Supply Status] from the [Other] pull-down menu.
Use this command to check the status of the target when the target power supply is used, as when data is written
on-board.
5.4.5 PROM Load
[PROM Load] downloads data from the master ROM mounted in the master ROM socket of the PG-FP3. Usually,
the master ROM is a function that allows you to download the user program when only the PG-FP3 is used. However,
data can be also downloaded by using the master ROM from FLASHPRO3.
Execute this command by selecting [PROM Load] from the [Other] pull-down menu or by clicking the
button on the operation screen.
It is assumed that a general EPROM is used as the master ROM. For details on the master ROM socket, see
Section 7.3. The master ROM command reads the signature of the mounted ROM before the master ROM is
downloaded in order to check if the ROM is usable or if the ROM is correctly mounted. If the ROM on the master ROM
socket is not supported by the PG-FP3, the dialog box below is displayed. If this happens, replace the ROM with the
one supported by the PG-FP3.
While the master ROM is being accessed, the ACCESS LED lights. Do not remove the ROM while this LED is lit.
5.5 HelpWhen [Help] is clicked, the pull-down menu shown below is displayed. This menu lists the commands that open the
help file or check the version of FLASHPRO3.
The functions of these commands are as follows:
•Contents.................................Displays the table of contents of the help file.
•Search for Help on keyword...Searches for information based on a keyword.
•How to Use Help.................... Displays information of using the help file.
•About Flashpro3.....................Displays the version information for FLASHPRO3.