- 36 -
4. Select VIA 4in1 service pack driver install to the system
5. The Screen will appear VIA 4in1 driver setup screen, please press “NEXT” to continue. Please follow the steps
instructed by each screen for the installation of the VIA 4in1 driver. Restart the system after the completion of the
installation.
6. After VIA 4in1 driver installed, please select VGA driver for install. The system will request for “restart” after the
completion of the driver installation.
7. The Screen can be adjusted at Display properties after the installation of VGA driver.
We strongly recommend using the 4in1 driver to install the system since the 4in1 driver will automatically
detect / update the necessary drivers.
This driver will automatically detect and install the latest utilities as following:
IDE Bus master , VIA AGP Driver, IRQ Routing Driver, VIA INF Driver
LAN Driver: Install the LAN driver for on-board LAN adapter. Please refer to Chapter 5, the Realtek 8139 LAN Driver
Installation Procedure.
VGA Driver: Install the VGA driver for on-board AGP VGA adapter
Please download or check from VIA Web-site: www.via.com.tw if you prefer to install the drivers individually or you need
more information.