- 42 -Software Installation Examples
Before installing the driver programs, please refer to each directory that contains a README file, which provides detailed
installation instructions, or to execute the HELP8139.EXE help file viewer in DOS. The utility will then present with a
screen showing the information about how to install the network driver. Driver needed for the
adapter to work with the operating system.
Please note: The LAN Driver installation has to be done after completing Win 95/98/2000 installation.
When completed with the WIN 95/98 installation, please click “My Computer” to start your LAN driver installation
(procedure listed as below):
My Computer è Control Panel èSystem è Device Managerè
? Other Devices è ?
PCI Ethernet Controller è Properties è Driver è Update Drive
è Yes (Recommended) è Next è Other Locations è Browse
è A:\Rtsnt.100\Exe\Win95 è OK è Finish
After finishing the above procedure, the screen will show “copy the files from?”
Please type A:\Rtsnt.100\Exe\Win95=> OK and select “OK”, the system will ask you to insert Win95 driver diskette to
update new driver.
After finishing the above steps, please shut down your system and re-boot the system.
Using this utility to update the system BIOS from a disk file to the on board Flash memory. Be aware the improper
change of the system BIOS will cause the system to malfunction.
Using utility as follows:
1. nsert the FLASH memory BIOS utility distribution floppy diskette in drive A:
2. At the DOS prompt, type A:\> F82725 xxxx.ROM <Enter>