11.Cautions
1.Application : This specification is applied to 6wire Touch Panel.
2.Warranty : TOUCH PANEL products manufactured to this specification shall be capable of meeting all characteristics for a minimum period of 12 months the date of shipping from NAGASAKI IPC when stored or used as specified under normal conditions within the contents of these sheets. If TOUCH PANEL products are not stored or used as specified herein, it will be void the 12 months warranty.
3.Features
Type Analog Resistive Type Touch Panel |
| |
Input Mode | Polyester Pen or Finger |
|
Structure | ||
4. Characteristics |
| |
4.1 Operating Temperature Range : From | to 60 (Humidity 90%RH or lower, no dew condition shall be | |
acceptable) |
|
|
4.2 Storage Temperature Range : From | to 70 | |
(Humidity 90%RH or lower, no dew condition shall be acceptable) | ||
4.3 Input Method |
|
(1) with Polyester Pen
Operation and measurement with a pen must be carried out under the following trip condition
Material | Polyester |
| Tip SR 0.8 millimeter |
|
(2) with Finger |
|
|
| |
Operation and measurement with a finger must be carried out under the | ||||
Material | Silicon rubber (Hardness: 60ºHs) | Tip SR 12.5 millimeter | ||
5. Electrical Specifications |
|
| ||
5.1 Linearity | Direction ± 1.5% or less (with calibration controller) | |||
5.2 Insulation Resistance | 20 MO or more @ DC 25V | |||
5.3 Chattering Time | 10 millisecond or less @ 100KO | |||
6. Mechanical Specifications | Item No. Item Ratings Test Methods & Condition | |||
with Polyester Pen SR 0.8 |
|
According to applicable product specification Less than 150g Using a load cell with a Polyester Pen conforming to the specifications set forth in item 4.3 (1) attached to its tip, apply a vertical load within the valid area.
Using themeasurement circuit illustrated in diagram
- 6 -