IBM PS1500 Play With Headphones, Play With The Pedals, Soft Sostenuto Damper, User Guide

Headphones/Pedals

PLAY WITH HEADPHONES

•Plug a set of headphones into the left headphone socket.

The headphones sockets panel is located on the left side of the instrument, under the key- board. Inserting the headphones plug into the PHONES 1 jack excludes the internal speakers to allows you to play in total silence without disturbing others in the same room. Plugging into the PHONES 2 jack does not exclude the internal speakers.

Use the Master Volume slider to control the headphone volume.

PLAY WITH THE PEDALS

The group of three pedals, denoted Ped1, Ped2 and Damper, provide preset functions.

The default configuration of the pedals is as fol- lows:

• Ped1	=	Soft
• Ped2	=	Sostenuto
• Damper	=	Damper (sustain)

The pedals are function assignable and can be independently enabled or disabled to react with the keyboard sections of a Preset.

All three pedals are switch action controls.

▶Note: If the Pedals do not appear to operate, check that the cable running from the pedal groups is properly connected to the PEDALS socket on the rear panel of the instrument.

SOFT

SOSTENUTO

DAMPER

1•14 User Guide