IBM PS1500 Sounds & Presets, Changing The Keyboard Mode, Press and hold EASY PLAY/SPLIT

CHANGING THE KEYBOARD MODE

The keyboard Sounds can be set to one of two keyboard modes:

•Full Mode- The tracks Upper 1 and Upper 2 play across the entire keyboard range. The Lower section is disabled for activation.

•Split Mode - The tracks Upper 1 and Upper 2 play to the right of the split point while the Lower track plays to the left from the Split point down. When Easy Play is off (LED off), deactivating the Lower track assigns the Up- per tracks to the entire keyboard. When Easy Play is on (LED on), deactivating the Lower track does not change the status of the Up- per tracks (they remain assigned to the part of the keyboard above the split point), while Lower does not play.

The following example outlines how to select the keyboard modes.

1.Press and hold EASY PLAY/SPLIT.

The display changes to the MODE/SPLIT POINT window showing two parameters: Mode and Split. The Mode parameter (which determines the Full or Split modes) will al- ready be selected (flashing).

2.If the Mode parameter is not selected (flashing), press the corresponding Function button F1 or F2.

Changing the Keyboard Mode

FULL MODE

< ------- Full Keyboard (Upper 1 and/or Upper 2) ------- >

SPLIT MODE (Split point (F#3)

<	Lower ------	><		Upper 1 and/or Upper 2 >
			-----

1	EASY PLAY
	SPLIT

2

1/1 MODE/SPLIT POINT:

Mode=Full					Split Point=F#3
F1	F2	F3	F4	F5	F6	F7	F8

Sounds & Presets 4•15