IBM PS1500 4 22 User Guide, Change The Name Of A Preset, Press PRESET. in the EDIT section

Store Preset

CHANGE THE NAME OF A PRESET

1.Press PRESET. in the EDIT section.

2.Hold PAGE+/BANK+ pressed to scroll to the last page (Page 9) to open the “Preset name” win- dow.

The current Preset name is shown at the “Old name” position.

The “NewName” position will be active, ready to accept your character insertions.

1 PRESET

2 PAGE+ / BANK+

PAGE– / BANK–

9/9 PRESET:GrandP[OverWrite]

Old name=GrandP -----> New name=

3.Change the Preset name using the keys of the keyboard.

In Name Write mode, the keyboard trans- forms into a source of alphanumeric data. Each note corresponds to a letter, number or symbol.

Write in a new name by striking correspond- ing keys of the keyboard. Up to 6 characters can be used to write a name.

How the keys are used for writing in data is explained in the section entitled “Data entry” of Chapter 3 (Basic Concepts - page 3-15).

4.Press ESCAPE to close the window.

5.Press STORE PRESET followed by ENTER to save the Preset name.

3

4

ENTERESCAPE

5 STORE PRESET

ENTERESCAPE

4•22 User Guide