IBM PS1500 owner manual Quick guide, Press the PAGE+/BANK button once

REGULATE THE GENERAL EFFECT VOLUMES AND ACTIVATE LOUDNESS

It is possible to regulate the general effect vol- umes to suit the surroundings and activate the Loudness function.

Although each Preset recalls appropriate effect volume settings for each track, a general setting can be applied to render the effects more or less intense with a single command.

The Loudness control introduces a particular equalisation (a simultaneous control of the Bass and Treble tones - similar to that found on home stereo units). When Loudness is ON, it favours certain frequencies at low volume.

1.Press the GENERAL button in the EDIT section).

2.Press the PAGE+/BANK button once.

3.Select the parameters with the Function buttons:

Rev=Reverb (F1/F2), Eff=Effect (F3/F4), Loud=Loudness (F5/F6).

4.Modify the selected parameter, either with the Dial, or with the Sliders F1 … F8.

DIAL: Rotate the DIAL to change the status of the selected parameter.

SLIDERS F1…F8: When you enter any Edit situation, the Sliders F1…F8 activate as data entry devices automatically. Use the sliders to change the parameter values directly with- out selecting them first.

TOGGLE THE F BUTTON: You can toggle between the ON and OFF status of the LOUDNESS option by pressing Function button F7 or F8 repeatedly.

5.Press ESCAPE or GENERAL to exit Edit General.

The settings remain in memory (RAM) after turning off the instrument.

general Effect volumes and loudness

1/2
		GENERAL
						PAGE+ / BANK+
						PAGE– / BANK–
3/4
2/5 GENERAL:[EFFECT VOLUME]
Rev=127		Eff=127		Loud=on
F1	F2	F3	F4		F5	F6		F7		F8
						ACCOMPANIMENT
			DRUMS	BASS	ACCOMP.1	ACCOMP.2	ACCOMP. 3	LOWER	UPPER 2	UPPER 1
										MAX
										MIN
			F1	F2	F3	F4	F5	F6	F7	F8
5
GENERAL
		OR
				ENTER				ESCAPE

Quick guide 1•15