Flash Bios, Loaddskf 1FUDxxUS.DSK a

Flash BIOS

Please do the following to update BIOS.

To update BIOS:

1.Create the diskette image by the following command:

Note: XX: Translate to appropriate number.

2.Boot from the diskette. (Please make sure already attach AC and Battery)

3.When completed, the system is automatically turned off.

4.Make sure there is no diskette in the diskette drive, then turn on the computer.

5.PressF1 key into BIOS setup Utility during the boot time.

Note: ″Press F1 for IBM BIOS Setup Utility″ message is displayed at the lower-left area of the screen.

6.Press the F9 key to load default configuration.

7.Select Yes.

8.Press the F10 key to save default configuration.

9.Select Yes. The system will restart automatically.