Safety Notice 8

Translations in Safety Notices (Multi-lingual Translations)section: Before removing any FRU, power-off the computer, unplug all power cords from electrical outlets, remove the battery pack, then disconnect any interconnecting cables.

Attention: The system board is sensitive and can be damaged by electronic discharge. Establish personal grounding by touching a ground point with one hand before touching these units.

An electrostatic discharge (ESD) strap (P/N: 6405959) must be used to establish personal grounding.

1010 Battery assembly

1

2

Warning

Battery packs are capable of delivering high currents for a significant amount of time. Do not short the battery terminals.

CAUTION:

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.

1020 Mini-PCI cover and Mini-PCI card

v“1010 Battery assembly”

MT 2656, 2657, 2676 57

Page 63
Image 63
IBM R31, R30 manual Battery assembly, Mini-PCI cover and Mini-PCI card