Computer screen problems
Problem: The screen is blank.
Solution:
vIf the standby status indicator is on (in green), press Fn to resume from the
standby mode.
vIf you are using the ac adapter,or using the battery, and the battery status
indicator is on (in green), press Fn+Home to make the screen brighter.
vIf you attach an external monitor to your computer, pressFn+F7 to switch
the screen output location.
vIf the problem persists, do the “Solution”in the problem below.
Problem: The screen is unreadable or distorted.
Solution: Make sure that:
vThe display device driver is installed correctly.
vThe display resolution and color depth are correctly set.
vThe monitor type is correct.
Tocheck these settings, do as follows:
For Windows
®
2000 and Windows
®
98:
1. Double-click Display in the Control Panel. The Display Properties window
opens.
2. Click the Settings tab.
3. Check if the color depth and resolution are correctly set.
4. Click Advanced.
5. Click the Adapter tab.
6. Make sure “ATIMobility RADEON”or “ATI Mobility RADEON 7500”is
shown in the adapter information window.
7. Click the Monitor tab.
8. Make sure the Monitor type is correct.
For Windows
®
XP:
1. Click Start.
2. Click Control Panel.
3. Click Appearance and Themes in the Pick a category section.
4. Click Display in the Pick a Control Panel icon section.
5. Click the Settings tab.
6. Check whether the color depth and resolution are correctly set.
Solving computer problems
24 ThinkPad
®
R40 Series Service and TroubleshootingGuide