Iiyama L323W, L403W user manual English

Function 2

Adjustment Item			Problem / Option	Button to Press
Sharpness			Adjust the picture quality at resolutions of less than
			1280 × 768 when selecting “On” at “Full Screen” on
			Function 1.
	Mode 1 (≈ 9300K)		Bluish white (Approx. 9300K)
Color Control *3
	Mode 2 (≈ 7500K)		Yellowish white (Approx. 7500K)
	Mode 3 (≈ 6500K)		Reddish white (Approx. 6500K)
	User	Red	Too weak
		Green
		Blue	Too strong
Auto Balance *4	No		Return to the adjustment item line.
	Yes		Adjust the Red, Green and Blue to suitable colors automatically.

NOTE n For the Auto Balance to work correctly, display a white window no smaller than 5cm × 5cm.

nThis adjustment takes approximately five seconds and then the screen becomes dark.

nThe Auto Balance may not work correctly due to your computer system, resolution or displayed pattern. In this case, select “Reset” on Function 1 and restore factory-preset data.

	PIP *5	Off		PIP function is turned off.
		On		PIP function is turned on.
	PIP Control *5	H Position		Sub screen is too far to the left
				Sub screen is too far to the right
		V Position		Sub screen is too low
				Sub screen is too high
		PIP Size	1	Sub screen is displayed at minimum size.
			2	Sub screen is displayed at normal size.
			3	Sub screen is displayed at maximum size.
		Source	TV	Display a TV picture in the sub screen.
		Select
			AV-1	Display a AV-1 picture in the sub screen.
			AV-2	Display a AV-2 picture in the sub screen.
		Sound	Main	Output the sound from the computer.
		Select
			Sub	Output the sound from the signal source for sub screen.
*3	The indicated color temperature in Kelvin is approximately the standard.
*4	Available for PC Analog input only.
*5	Available only when OTA3-2PS or OTA3-2PSB is installed in the monitor, and vertical frequency of PC input is 60Hz.
	PIP = Picture in Picture:
	With this function, you can display two different pictures, such as a picture from the computer in the main screen and a TV / DVD / Video
	picture in the sub screen at the same time. Select “On” at “Full Screen” on Function 1 first.

ENGLISH

OPERATING THE MONITOR 11