BASIC OPERATION |
|
n Turn on the monitor |
|
Monitor is turned ON and the Power Indicator turns to blue when you connect the Power | [ Remote Control ] Press the Power Switch. |
Cable to the power supply. The monitor is turned OFF and the Power Indicator turns to |
|
orange when you press the Power Switch on the monitor or the Remote Control. |
|
Press again to turn ON the monitor. |
|
[Monitor ] Press the Power Switch.
NOTE Even when using the power management mode or turning OFF the Power Switch, the monitor will consume a small amount of electricity. Disconnect the Power Cable from the power supply whenever the monitor is not in use, during the night, to avoid unnecessary power consumption.
ENGLISH
n Select channel, Move the cursor vertically
Press the Channel Select Button (
/ 
) on the monitor or the Remote Control to select a TV channel when the menu page is not displayed on the screen.*
Select adjustment by pressing the Channel Select Button (
/ 
) while the menu page is displayed on the screen.
[Monitor ] Press the Down / Up: Channel Select Button (
/ 
).
* When antenna is connected.
NOTE You can select only the channels set to “Skip Off” at “Channel
n Adjust the volume of sound, Move the cursor horizontally
Press the Vol: Volume Control Button (
/ 
) on the monitor or the Remote Control to adjust the volume of sound when the menu page is not displayed on the screen. Select menu or setting, or perform the adjustment by pressing the Vol: Volume Control Button (
/ 
) while the menu page is displayed on the screen.
[Monitor ] Press the Vol: Volume Control Button (
/ 
).
[Remote Control ] Press the Ch: Channel Select Button (
/ 
).
[Remote Control ] Press the Vol: Volume Control Button (
/ 
).
APPENDIX B 19
