Iiyama L403W, L323W Speaker Installation, Procedure and Conditions for Monitor Installation

SPEAKER INSTALLATION

CAUTION n Turn off the power switch and unplug the monitor before installation to avoid electric shock or damage.

nThe speaker is heavy. Two person handling is recommended.

nInstall the speaker on a stable surface. The monitor or the speaker may cause injury or damage if they fall or are dropped.

nDo not give a strong impact to the monitor or speaker. It may cause damage.

n Do not push mesh area of speaker strongly to avoid denting it.

Speaker

ENGLISH

Bracket

A Ensure that both the computer and the monitor are switched off.

BFasten the Bracket to the Speaker with the Screws.

CFit the screw holes of the Bracket to the cavities on the back of the monitor (4 cavities for each side)

and then tighten the Screws to fasten the Speaker.

NOTE Do not misplace the right and left speakers. Install the speakers with bass reflex port down.

DInsert the Speaker Cable into the Speaker Input Terminal and Output Terminal.

NOTE When connect the Speaker Cable, conform the color of the Speaker Cable and Speaker Terminal. If the cables are connected incorrectly the sound quality will be reduced.

Back Speaker

Speaker Cable Front

NOTE

Remove the Speaker by using the procedure above in reverse.

Bass reflex port

PROCEDURE AND CONDITIONS FOR MONITOR INSTALLATION

CAUTION n The monitor is heavy. Two person handling is recommended.

nDo not give a strong impact to the monitor. It may cause damage.

nUnplug the monitor before installation to avoid electric shock or damage.

Follow the instructions below when installing the monitor to the wall.

AEnvironmental temperature and humidity for installation:

Please be sure that an environmental temperature and humidity DO NOT exceed the range described in the page 15 SPECIFICATIONS.

B Size of screw

nM6

n Length: After fasten the bracket with screws, the length of screw in the monitor should be more than 10-15mm.

n Position: more than 6 points

C Recommended supportive device:

For the details of installation, see the manual of your supportive device.

Name: OBR (FFP-IN00-X)

OBR :FFP-IN00-X (Optional)

Screw × 6

6BEFORE YOU OPERATE THE MONITOR