. Apply a generous amount of the included grease to the Ramp Axle (74).
Have a second person hold the Ramp (78) near the Frame (1) in the position shown. Insert the Ramp Axle (74) through the Ramp and the Frame. Tighten an M8 x 25mm Patch Screw (70), with an M8 Washer (64) and a
Ramp Cover (59), into each end of the Ramp Axle.
Next, pull the Ramp Pin (90) and align the Ramp (78) with one of the three holes in the Frame (1). Then, release the Ramp Pin into the Frame. Make sure the Ramp Pin is firm- ly engaged in the Frame.
78
64
59
64
74
59
Identify the Left Pedal Arm (21), which is
marked with a "Left" sticker.
19
Attach a Pedal (19) to the Left Pedal Arm (21) with three M4 x 19mm Screws (68) and three Star Washers (85).
Repeat this step for the Right Pedal
Arm (not shown),
\ 8521 68
7
