HUBCTRL32 Installation Instructions
Software and Hardware Requirements
HUBCTRL32 for Windows NT requires the following:
lWindows NT version 4.0 or higher.
lThe same hardware requirements for Windows NT plus a network
interface card.
lInternet Explorer 4.0 service pack 2 or higher required for the Help
to work.
HUBCTRL32 for Windows 98 requires the following:
lWindows 98.
lThe same hardware requirements for Windows 98 plus a network
interface card.
lInternet Explorer 4.0 service pack 2 or higher required for the Help
to work.
NOTE: HUBCTRL for DOS is also available. Please contact IMC
Networks Technical Support at 800-624-1070 (in U.S.) or via e-mail
at techsupport@imcnetworks.com for more information.
Downloading HUBCTRL32
From the IMC Networks Web site:
1) Download the file hubctrl32.exe from IMC Networks Web
site. The file can be found under the section Other at:
http://www.imcnetworks.com/tech/software.htm
2) Use Windows Explorer to locate the downloaded file. Double
Click the file to start. A Welcome dialog box for the
HUBCTRL32 Setup Program will appear.
3) Click Continue. The Setup program will launch.
4) Proceed to the Installing HUBCTRL32 for Windows NT and
Windows 98 section on the next page.
From the iView CD:
1) Using Windows Explorer, browse the iView CD and double-
click on the file SETUP.EXE located in the directory HC32/.
2) Follow the on-screen instructions.
3) Proceed to the Installing HUBCTRL32 for Windows NT and
Windows 98 section on the next page.
Ap.4