User Manual version 2.1
OPEN (660) 120/140/150
9-120
9.2.3. Installation
This section details the installation procedures for the
software on the DOS and Windows Driver Disk. Four
steps are required:
Step 1 Configuring the touchscreen controller
Step 2 Installing the controller
Step 3 Running the INSTALL program
Step 4 Calibrating the touchscreen
STEP 1 - CONFIGURING THE TOUCHSCREEN CONTROLLER
THE MANUFACTURER ships most touchscreen controllers
preconfigured for use with Elo software.
STEP 2 - INSTALLING THE CONTROLLER
If you need help when installing the touchscreen
controller or making the connections, please contact the
Manufacturer’s Customer Service department.
STEP 3 - RUNNING THE INSTALL PROGRAM
The DOS and Windows Driver Disk contains an
installation program which will automatically transfer all
necessary files to the hard disk.
If you intend to install the Windows drivers, make sure
that the Windows has been installed and operating
properly before proceeding. You must have a DOS
mouse driver (MOUSE.COM) installed for your mouse if
you wish to continue using your mouse along with the
touchscreen in DOS or Windows.
If you only want to change the configuration of your
touchscreen controller, see Changing Your Hardware
Configuration with SETUP, page 14, for information on
the SETUP utility.