User Manual version 2.1
OPEN (660) 120/140/150 2-21
2.5.3. Operating System and Driver Installation
The OPEN (660) system is not equipped with an
operating system when delivered from the original
manufacturer. If you are a commercial user, the system
is likely to have been pre-installed proper operating
system and software drivers by your dealer or system
integrator.
If the system is not pre-installed with any system OS and
drivers or you intend to install your preferred ones, there
are several ways to load OS and software into the
system.
1. Via the external FDD or internal FDD
2. Via the external CD-ROM or internal CD-ROM
3. Via Ethernet: You can boot up the system via Ethernet
bootrom and download system OS or software from
the network.
Recent releases of operating systems always include
setup program which load automatically and guide you
through the installation. You can also refer to your OS
user manual for instructions on formatting or partitioning
the hard disk drive before any software installation.
The OPEN (660) system provides the following utility
drivers which are stored in the CD-ROM diskette or
utilities diskettes;
² Ethernet utilities
² VGA utilities
² Audio drivers
² Touchscreen drivers