User Manual version 2.1
OPEN (660) 120/140/150 7-99
7.4.10. User Password
The USER PASSWORD is used to set the password. To
change the password, select this option from the main
menu and press <Enter>.
If the CMOS does not work properly or the USER
PASSWORD option is selected for the first time, then a
default password is stored in the ROM. The following
message will appear on the screen;
Enter Password
Press <Enter>.
If the CMOS is working properly or the USER
PASSWORD option is selected to change the default
password, then the current password (the ROM password
or the use-defined password) stored in the ROM needs to
be entered first. The following message will appear on
the screen;
Confirm Password
Enter the current password and press <Enter>.
After pressing <Enter>, then the new password (8
characters at most) can be entered now. The new
password will be stored in the CMOS.
Please note that to enable this option, either Setup or
System is to be selected from the BIOS FEATRUES
SETUP first.