Intel OPEN (660) 120/140/150 II 5.7. External FDD (DB-15)

User Manual version 2.1

OPEN (660) 120/140/150 5-55

5.7. External FDD (DB-15)

The OPEN (660) 120/140 II does not build in any floppy

disk drive into the main system. Rather, it provides a

FDD interface located at the rear panel. The OPEN (660)

150 can either use an internal floppy disk drive or to

external type. When the OPEN (660) system is using

external floppy disk drive, an external FDD cable is

provided to connect a standard 3.5” FDD to the system

for system O/S and application software installation. Its

pin position and pin assignment are listed as follows.

Pin # Signal Pin # Signal

1DELSEL 9-WD

2-INDEX 10 -STEP

3-MTR1 11 -RD

4-DVR1 12 -HDSEL

5-DIR 13 -DSKCHG

6-WP 14 +5V

7-TRKO 15 +12V

8-WG

The OPEN (660) system is equipped with a

+5V/12V DC-out connector to provide 5V

power to drive the external floppy disk

drive. Use the provided FDD power cable

to connect the floppy drive to the 5V DC-

out connector when an external floppy

drive is attached to the system.