User Manual version 2.1
OPEN (660) 120/140/150
9-126
11. Close the Registry Editor by clicking the Close box.
12. Restart the computer.
13. Click the Start button, then click Settings, and then
click Control Panel.
14. Double-click Elo Touchscreen to run the
Touchscreen Control panel.
15. Click the Calibrate button and touch each of the
three targets as they appear on the screen. Click
Yes when the cursor lines up correctly with your
finger. Click OK to close the Touchscreen Control
panel.
NOTES
² Full-screen DOS mode is not supported. However,
Windowed DOS mode is fully supported. A touch to a
full-screen DOS session will cause your system to
immediately return to your Windows desktop. A
mouse can be used to access programs run in full-
screen DOS mode.
² Windows 95 may lock up during startup if the
resource settings in the Setup dialog of the
Touchscreen Control Panel do not match the actual
controller configuration. Use Safe Mode to start
Windows 95 and change the resource settings to
match the controller configuration, then restart
Windows 95.
² The touchscreen driver may cause Windows 95 to
lock up during Shutdown if the touchscreen is
activated after Shutdown is initiated.