120 DMC 1000 Digital Media Camcorder User’s Guide (v1.15)
Chapter 12 - Side panel menu
12.4 System menu
UB6 0..F (0) Sets a value for user bit 6. 0Prod
UB7 0..F (0) Sets a value for user bit 7. 0 Prod
UB8 0..F (0) Sets a value for user bit 8. 0Prod
setup
input type DVITC, LTC Selects timecode type to be used for the
input:
DVITC = Digital Vertical Interval Time Code;
LTC = Linear Time Code.
0Prod
f-run sync Real time, Local value,
External
Selects type of timecode synchronisation. 0 Prod
ATC SD 11.. 18 (11) Selects the video line number used to embed
the ATC (Ancillary Time Code) into the SD
video signal.
0Prod
dropframe NDF, DF Selects non drop frame (NDF) mode or drop
from (DF) for timecode.
0Prod
ATC HD NONE, 9Selects the video line number used to embed
the ATC (Ancillary Time Code) into the HD
video signal.
0Prod
play mode Regenerated, From file Sets the playback mode of the timecode
generator.
0Prod
new timecode
hrs 0..24 (0) Sets value for hours. 0 Prod
min 0..59 (0) Sets value for minutes. 0Prod
sec 0..59 (0) Sets value for seconds. 0 Prod
frms 0..29 (0) Sets value for frames. 0Prod
recbuff
preferred media Not Active Order of preferred media when the camcorder
switches media during recording.
0Prod
metadata
storyfile <no story>, <list of story
file names>
Selects story file name used in the system. 0 -
Menu item Values Description Level File
Menu item Values Description Level File
hardware
viewfinder
VF monitoring Y, R, G, B, x-G Selects type of signal to view in viewfinder:
Y = luminance signal;
R,G,B = red, green or blue channel;
x-G = inverted green channel
2 Oper
detail