Infinity DMC 1000 7. 2 Time code settings, 7. 3 Recording buffer, 7. 4 Recording media

DMC 1000 Digital Media Camcorder User’s Guide (v1.15) 89
Chapter 7 - Recording setup
7. 2 Time code settings
To set the time code use the SETUP menu on the side panel display.
1. Tap TIMECODE .
2. To set the time code, tap TC SET and use the arrows in the pop-up to select a time code
value.
– To reset the time code to zero, tap TC RESET .
– To re-generate the time code from the inserted media, tap SYNCHRONIZE/RE-
GENERATE
.
– To synchronize the time code to a selected source, tap SYNCHRONIZE/SOURCE .
3. To change the time code mode from the default value free-run (continuous time clock) to
rec-run (recording time only), tap
RUN MODE to toggle the value.
7. 3 Recording buffer
The built-in recording buffer enables the camcorder to continue recording even when the
media is temporarily unaccessable, for example, due to heavy shocks. This system operates
automatically. When the anti-shock function is activate, the buffer indicator on the viewfinder
screen shows buffer usage.
7. 4 Recording media
The media bay on the top-right shoulder of the camcorder includes one REV PRO media slot
and two CompactFlash slots. Slide the cover switch towards the back of the camcorder to
open the protective cover and to get access to the media slots.
To insert a disk into the REV drive:
1. Ensure that the REV PRO logo on the disk is facing away from the camcorder.
2. Insert the disk in the direction indicated by the arrow on the front of the disk and push
firmly until it clicks into place.
– Wait a few seconds for the disk to be mounted.
– When the disk is ready for use, the indicator is blue.
– The indicator is purple when the disk is full.