Infinity DMC 1000 2.4 Attaching a battery

DMC 1000 Digital Media Camcorder User’s Guide (v1.15) 25
Chapter 2 - Attaching parts
2.4 Attaching a battery
To attach a battery to the battery plate proceed as follows:
1. Insert the studs of the battery into the corresponding keyhole slots located at the back
of the plate.
☞Note
Different plates are optionally available for different battery types.
2. Slide the battery sideways (to the right, as shown below) until it clicks into place.
3. To remove the battery, press down the locking lever and unclip the battery by sliding it
to the left.
For more details on using your battery, refer to the battery manufacturer’s documentation.
1
2