DMC 1000 Digital Media Camcorder User’s Guide (v1.15) 145
Chapter 14 - Maintenance
7. When both a software package file and a license file are found in the root directory of the
USB-stick, the following message appears:
FOUND BOTH A LICENSE UPDATE FILE AND A
PACKAGE UPDATE FILE.
WHICH ONE WOULD YOU LIKE TO USE?
PRESS [SELECT] FOR THE PACKAGE UPDATE FILE
PRESS [EXP. TIME -] FOR THE LICENSE UPDATE FILE
PRESS [AUTO WHITE] TO RESTART CAMERA
Press the Select button to continue installing the software update or press the Auto
White switch at the front of the camcorder to cancel the procedure and restart the
camcorder.
When a previous version of the package file exists in the internal memory, the camcorder
makes a backup of this file on the USB-stick. The file is renamed to
“backup_package.zip”. The following message is shown:
BACKING UP OLD PACKAGE
8. The software package file is being copied from the USB-stick to the internal memory of
the camcorder. The following message appears:
COPYING PACKAGE TO SYSTEM
☞Note
When this message does not appear it indicates that no software package file could be found
in the root directory of the USB-stick or that the filename is not “package.zip”. You can cancel
the update procedure by switching off the camcorder after the next message.
9. After a few seconds the following message appears:
PACKAGE UPDATE TO PACKAGE ###
PRESS [SELECT] FOR FULL UPDATE (## FILES)
PRESS [EXP. TIME -] FOR INCREMENTAL UPDATE (## FILES)
☞Note
Check the software update version. When it is not the correct version you can cancel the
update procedure by switching off the camcorder.
– When the software package file is corrupt the following message appears:
ERROR OCCURED WHILE HANDLING NEW PACKAGE
PACKAGE IS CORRUPT
PRESS [SELECT] OR [EXP. TIME -] TO RESTART CAMERA
Try downloading the file again and copy it to the USB-stick.