Inova OnTime Digital Clock Owner's Manual
Section 9: Recording Static IP Addresses or Host Names
In order to make the management of your OnTime Digital Clock system as easy as possible, Inova recommends that you record the IP Address/Host Name for each unit in the system as it is installed. Refer to Appendix A to see how to determine the IP Address of a clock.
A table is provided below for recording each IP Address/Host Name as the unit is installed. Record the Clock ID in column 1, the location in column 2, and the IP Address/Host Name in column 3.
The Host Name will be visible in most DHCP servers. It should describe the location so that the IP Address of a particular clock will be easy to locate by matching up the Host Name.
CLOCK ID# LOCATION
IP ADDRESS/HOST NAME
Table 7: Recording IP Addresses or Host Names
All claims based on information publicly available at time of printing. All other product or service names mentioned in this document may be
trademarks of the companies with which they are associated. © 2007 Inova Solutions. All rights reserved. 6.12.2007 page 20
