Inova OnTimeTM owner manual Netstat, Reboot Configuration Commands

Inova OnTime Digital Clock Owner's Manual

View log on session screen or enable/disable logging

List all TCP connections

Display info to diagnose DNS problem with SNTP server

Configuring the 12/24 Time Format

Configuring the AM/PM Indicator

Configuring Colons On/Off

Update clock firmware

Log To view the log on the session screen.

log onoff To enable/disable logging.

When logging is enabled, by typing “log on”, the idle session time out feature is disabled.

netstat

nslookup SNTPServerName where SNTPServerName is the hostname or IP address of an SNTP server.

display –t 24 Sets 24 hour display. Note the space before and after –t

display –t 12 Sets 12 hour display. Note the space before and after –t

display –p off Turns off pm indicator. Note the space before and after –p

display –p on Turns on pm indicator. Note the space before and after –p

display –c off Turns off colons. Note the space before and after –c

display –c on Turns on colons. Note the space before and after –c Refer to FAQ at www.buyinova.com under the support tab.

Reboot the clock

reboot

Table 8: Configuration Commands

All claims based on information publicly available at time of printing. All other product or service names mentioned in this document may be

trademarks of the companies with which they are associated. © 2007 Inova Solutions. All rights reserved. 6.12.2007 page 26