Inova OnTimeTM owner manual Configuring Daylight Saving Time, Configuring 12/24 Time Format

Inova OnTime Digital Clock Owner's Manual

Configuring Daylight Saving Time

The following table identifies the process for setting daylight saving time.

No Daylight Saving Time	Type the command to disable DST: dst –none
	Press the Enter key.
In the U.S. and Canada	Type: dst -rule -1 8 2 2 1 1 10 2
	Press the Enter key.
	Note: dst –rawwill work in all clock versions. dst -ruleworks
	with Versions 1.1 or 1.2.
For European Daylight Saving	Type: dst -rule 1 -1 2 1 1 -1 9 1
Time	Press the Enter key.
Other locations	The support web site at www.buyinova.com contains a DST
	calculator which can compute the correct DST configurations
	string for you location. Obtain the correct string and enter it
	with the dst –rulecommand.

Table 5: Configurations for Daylight Saving Time

Three additional time related configuration items should also be set initially. The commands for setting 12/24, AM/PM, and Colons On/Off are identified below.

Configuring 12/24 Time Format

display –t 24

Sets 24 hour display. Note the space before and after –t.

display –t 12

Sets 12 hour display. Note the space before and after –t.

Configuring AM/PM Indicator

display –p off

Turns off pm indicator. Note the space before and after –p.

Display –p on

Turns on pm indicator. Note the space before and after –p.

Configuring Colons On/Off

display –c off

Turns off colons. Note the space before and after –c.

display –c on

Turns on colons. Note the space before and after –c.

All claims based on information publicly available at time of printing. All other product or service names mentioned in this document may be

trademarks of the companies with which they are associated. © 2007 Inova Solutions. All rights reserved. 6.12.2007 page 18