|
|
|
|
|
| Insignia |
| To connect the antennas: | Connecting audio components | |||||
1 Connect the FM antenna to your receiver. | HDMI cable | |||||
|
|
|
|
|
| |
Note
If you are using an indoor FM antenna, change the position of the antenna until you get the best reception of your favorite FM stations.
To improve reception, use a 75 Ω outdoor antenna instead of an indoor antenna. Disconnect the indoor antenna before replacing it with an outdoor antenna.
Tip
Once your receiver is ready for use, you need to tune into a radio station and position the antenna to achieve the best possible reception.
If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available outdoor FM antenna instead.
Receiver
TV or projector | Game console |
Video
Audio
2Connect the AM loop antenna to the receiver.
Notes
Place the AM loop antenna as far as possible from the receiver, television, speaker cords, and the AC cord. Change the position of the antenna until you get the best reception of your favorite AM stations.
To improve reception, use an outdoor AM antenna instead of a loop AM antenna. Disconnect the indoor antenna before replacing it with an outdoor antenna.
Receiver
TV or projector | Game console |
| Signal | Cable | Jack |
|
Video and | HDMI | HDMI |
|
audio |
|
| |
|
|
| |
Video | Y | Y | Green |
| Component video | ||
|
|
| |
| Pb/Cb | Pb | Blue |
| Pr/Cr | Pr | Red |
|
| ||
| Composite video | Y | Yellow |
Audio | Optical digital audio | OPTICAL |
|
|
|
Coaxial digital audio |
| Orange |
|
| |
|
| DIGITAL |
Analog audio (RCA) | L | White |
| R | Red |
Notes
•Before making any AV connections, read the manuals supplied with your AV components.
•Don’t connect the power cord until you’ve completed and
•Push plugs in all the way to make good connections (loose connections can cause noise or malfunctions).
•To prevent interference, keep audio and video cables away from power cords and speaker cables.
AV cables and jacksDescription
HDMI connections can carry digital video and audio.
Component video separates the luminance (Y) and color difference signals (PR, PB), providing the best picture quality (some TV manufacturers label their component video sockets slightly differently).
Composite video is commonly used on TVs, VCRs, and other video equipment.
Optical digital connections allow you to enjoy digital sound such as PCM* or Dolby Digital. The audio quality is the same as coaxial.
Note: The available sampling rate for PCM input signals is 32/44.1/48/88.2/96 kHz. Even 176.4/192 kHz is effective in case of the HDMI connection.
Coaxial digital connections allow you to enjoy digital sound such as PCM* or Dolby Digital. The audio quality is the same as optical.
Analog audio connections (RCA) carry analog audio.
8 | www.insigniaproducts.com |