Insignia 29400403A Receiver components, Receiver features, Package contents, Front controls, Item, Function, Description

Insignia NS-HTIB51A 5.1 Channel Home Theater System

Receiver components

Receiver features

•110 Watts/Channel @ 6 ohms

•Audyssey 2EQ to Correct Room Acoustic Problems

•Audyssey Dynamic EQ for Loudness Correction

•Audyssey Dynamic Volume to Maintain Optimal Listening Level and Dynamic Range

•HDMI (Ver.1.4 with Audio Return Channel, 3D), Deep-Color, x.v.Color, Lip Sync, DTS-HD Master Audio, DTS-HD High Resolution Audio, Dolby TrueHD, Dolby Digital Plus, DSD and Multi-CH PCM

•3 HDMI Inputs and 1 Output

•3 Digital Inputs (2 Optical/1 Coaxial)

•Component Video Switching (2 Inputs/1 Output)

•Banana Plug-Compatible Speaker Posts

•40 FM/AM Presets

•H.C.P.S. (High Current Power Supply) Massive High Power Transformer

•Direct Mode

•192 kHz/24-bit D/A Converters

•Powerful and Highly Accurate 32-bit Processing

DSP

•Crossover Adjustment (40/50/60/80/100/120/150/200 Hz)

•A/V Sync Control Function (up to 100 ms)

•On-Screen Display via HDMI

* “x.v.Color” is a trademark of Sony Corporation.

Package contents

•Receiver

•2 Front speakers

•1 Center speaker

•2 Surround speakers

•1 Subwoofer

•Remote control

•2 x AA batteries

•FM antenna

•AM antenna

•Speaker setup microphone

•Color labels for speaker cables

•Speaker cables:

•11 ft. x 3

•26 ft. x 2

•RCA cable 10 ft. x 1

•20 rubber spacers for speakers

Front controls

Item	Description			Function
1	/	ON/STANDBY button		Press to turn on your stereo receiver.



2	HDMI THRU indicator			Lights when the HDMI pass-through function is
				activated in standby mode.
3	STANDBY indicator			Lights red when your stereo receiver is in
				standby mode.
4	Remote control sensor			Receives the signal from the remote control.
5	Display			See “Display” on page 4 for additional
				information.

6	SETUP button			Press to open the on-screen menus.
7	TUNING		/	Press TUNING	/	to tune the radio to the
	PRESET		/	next or previous station.
	ENTER			Press PRESET	/	to tune the radio to the
				next or previous station preset.
				Press ENTER to confirm a selection.

8	RETURN button			In menu mode, press to return to the main
				menu.
9	MEMORY button			Press to save a radio station preset. Press with
				the TUNING MODE button to clear presets.
10	TUNING MODE button			Press to turn on the receiver tuning mode and
				listen to the radio. Press with the MEMORY
				button to clear presets.
11	MASTER VOLUME knob			Turn to increase or decrease the volume.

12	Headphone jack			Plug your headphones into this jack.
13	Input selector buttons			Press to select the input signal source you want.

14	Protective cap			Remove when using jack.
15	AUX INPUT VIDEO jack			Plug an external video source into this jack.

16AUX INPUT AUDIO L/R Plug an external sound source into this jack. jacks

17	SETUP MIC jack	Plug the Audyssey setup microphone into this
		jack. See “Using the Audyssey 2EQ® room
		correction and speaker setup” on page 12.

18	AUDIO button	Press to access audio settings. See “Changing
		audio settings” on page 24.