Insignia NS-HTIB51A 5.1 Channel Home Theater System

•Using the remote control, press TUNER repeatedly to select AM or FM, then press D.TUN.

•Within eight seconds, press the number buttons to enter the frequency of the radio station you want. For example, to tune to 87.50, press 8, 7, then 5.

Presetting FM or AM stations

You can store a combination of as many as 40 of your favorite AM or FM stations as presets.

To store a station as a preset:

1Tune to the FM or AM station that you want to store as a preset. See “Listening to the radio” on page 15 for information on tuning your receiver.

2Press MEMORY. The preset number flashes.

3While the preset number is flashing (about eight seconds), press PRESET or to select a preset number from one through 40.

4Press MEMORY again to store the station or channel. The station or channel is stored and the preset number stops flashing.

5Repeat steps 1 through 4 to preset your favorite radio stations.

Tuning to a preset station

To tune to a preset station:

•To select a preset, press PRESET or on the receiver, or press CH +/– on the remote control.

Tip

You can also press the number buttons on the remote control to select a preset station directly.

Deleting preset stations

To delete a preset station:

1Select the preset you want to delete.

2Press TUNING MODE while pressing and holding MEMORY. The preset is deleted and its number disappears from the display.

Using the listening modes

Notes

•You can only select the Dolby Digital and DTS listening modes if your Blu-ray Disc/DVD player is connected to the receiver with a digital audio connection (coaxial, optical, or HDMI).

•The listening mode you can select depends on the format of the input signal. To check the format, see “Displaying source information” on page 14.

•You can only select Mono, Direct, and Stereo listening modes with a pair of headphones is connected.

•Listening modes cannot be selected while a pair of headphones is connected.

The receiver’s listening modes can transform your listening room into a movie theater or concert hall, with high fidelity and stunning surround sound.

The following audio formats are supported by the listening modes:

•MONO–This is mono (monophonic) sound. All the audio signals are mixed and reproduced through a single speaker.

•STEREO–This is stereo (stereophonic) sound. Two independent audio signal channels are reproduced through two speakers.

•5.1ch–This is 5.1-channel surround sound. This surround system has five main channels of sound and a sixth subwoofer channel (called the point-one channel).

•7.1ch–This is 7.1-channel surround sound. This is a further sound enhancement to 5.1 channel sound with two additional speakers that provide greater sound envelopment and more accurate positioning of sounds. The receiver outputs this source in 5.1-channel surround sound.

Selecting a listening mode

To select a listening mode:

•Press one of the following buttons. If you are using the remote control, press the RECEIVER button first. See “Listening modes” on page 17, and “Insignia-Original Listening Modes” on page 18 for information on listening modes.

•MOVIE/TV–This button selects the listening modes intended for use with movies and TV.

•MUSIC–This button selects the listening modes intended for use with music.

•GAME–This button selects the listening modes intended for use with video games.

•STEREO–This button selects the Stereo listening mode and All Channel Stereo listening mode.

16

www.insigniaproducts.com