Insignia NS-HTIB51A 5.1 Channel Home Theater System

Notes

•Two different inputs cannot have the same name.

•This menu cannot be used for the TUNER input selector.

Setting up HDMI (HDMI Setup menu)

CEC Function (HDMI Control submenu)

This function lets CEC-compatible components connected via HDMI to be controlled by the receiver.

Notes

• When set to On, the name of connected

CEC-compatible components and CEC On are

Submenu

Audio TV OUT

LipSync

CEC Function

Audio Return Ch (ARC)

Power Control

TV Control

Configuration

Off (default)–HDMI audio is not output. On–HDMI audio is output.

Disable (default)–HDMI lip sync disabled. Enable–HDMI lip sync enabled.

Off (default)–CEC disabled.

On–CEC enabled.

Off–Select if you don’t want to use audio return channel (ARC) function.

Auto (default)–The audio signal from your TV tuner can be sent digitally to the HDMI OUT of the receiver.

Off–Power Control disabled.

On (default)–Power Control enabled.

Off–TV Control disabled.

On (default)–TV Control enabled.

displayed on the receiver when the menu is

closed.

• When set to Off, CEC Off is displayed on the

receiver when the menu is closed.

• When a CEC-compatible component is

connected to the receiver via HDMI cable, the

name of the connected component is displayed

on the receiver. For example, when you are

watching TV, if you turn on a Blu-ray Disc/DVD

player by the receiver’s remote control, the

name of the Blu-ray Disc/DVD player is

displayed on the receiver.

• Set to Off when a connected piece of

equipment is not compatible or it is unclear

whether the equipment is compatible or not.

• If movement is unnatural when set to On,

change the setting to Off.

• Refer to the connected component’s instruction

manual for details.

Audio Return Ch (ARC)(Audio Return Ch submenu)

Audio TV OUT (Audio TV Out submenu)

This setting determines whether audio received by HDMI IN is output by the HDMI OUT. You may want to turn this preference on if your TV is connected to the HDMI OUT and you want to listen to the audio from a component that’s connected to an HDMI IN, through your TV’s speakers. Normally, this should be set to Off.

Notes

•If On is selected and the signal can be output by the TV, the receiver outputs no sound through its speakers.

•If On is selected, TV Sp On appears on the display when you press DISPLAY.

•When TV Control is set to On, this setting default is Auto.

•With some TVs and input signals, no sound may be output, even when this setting is On.

•When the Audio TV OUT or TV Control are set to On, and you are listening through your TV’s speakers, if you turn up the receiver’s volume control, the sound is output by the receiver’s front left and right speakers. To stop the receiver’s speakers from producing sound, change the settings, change your TV’s settings, or turn down the receiver’s volume.

LipSync (LipSync submenu)

Lets you set the receiver to automatically correct any delay between the video and the audio, based on the data from the connected monitor.

Notes

•This function only works if your HDMI-compatible TV supports HDMI Lip Sync.

•You can check the amount of delay being applied by the HDMI Lip Sync function on the A/V Sync screen.

The audio return channel (ARC) function enables an HDMI 1.4-capable TV to send the audio stream to the HDMI OUT jack of the receiver. To use this function, you must select the TV/CD input and your TV must support the ARC function.

Notes

•The Audio Return Ch setting can only be set when HDMI Control is On.

•This setting is set to Auto automatically when HDMI Control is set to On first time.

Power Control (Power Control submenu)

To link the power functions of CEC-compatible components connected via HDMI, select On. This is set to On automatically when HDMI Control is set to On first time.

Notes

•The Power Control can only be set when the HDMI Control setting is On.

•HDMI power control only works with CEC-compatible components that support it and may not work with some components.

•When set to On, power consumption increases.

•When set to On, regardless of whether the receiver is On or in Standby, both audio and video stream from an HDMI input is output to the TV or other components via HDMI connection (HDMI pass-through function). When the HDMI pass-through function activates in standby mode, the HDMI THRU indicator lights.

•The power consumption during standby mode increases during the HDMI pass-through, however when the TV is in standby mode or you are watching a TV program, power consumption can be improved.

•Refer to the connected component’s instruction manual for details.

www.insigniaproducts.com

23