Insignia 29400403A Configuring speakers (Sp Config menu), Unit, Small, Front, Small, Option, Recommended, Configuration, Configuration, Left, Subwoofer, 150Hz, and 200Hz

Insignia NS-HTIB51A 5.1 Channel Home Theater System

COAX, OPT1, OPT2–Select the digital audio input			Use the diameter of the smallest speaker in your
to which the video component has been			system when choosing the crossover frequency.
connected.
							Recommended
- - - - -–Select if you are using an analog audio input.				Speaker cone diameter
							Crossover Frequency
	Notes
				Over 8 in. (20 cm)			40/50/60 Hz
		• When an HDMI IN is assigned to an input
				6-1/2 to 8 in. (16 to 20 cm)			80 Hz
		selector as explained here, the digital audio
		input for that input selector is automatically set		5-1/4 to 6-1/2 in. (13 to 16 cm)			100 Hz
		to the same HDMI IN. In addition to the usual
				3-1/2 to 5-1/4 in. (9 to 13 cm)			120 Hz
		inputs, such as COAX, you can also select HDMI
				Under 3-1/2 in. (9 cm)			150/200 Hz
		inputs.
		• The available sampling rate for PCM signals
		from a digital input (optical and coaxial) is
		32/44.1/48/88.2/96 kHz/16, 20, 24 bit.
					Notes
		• If you connect a component to a UNIVERSAL
		PORT jack, you cannot assign any input to the				• For a more accurate setting, look up your
						speaker’s specifications.
		PORT selector.
						• Choose a higher crossover frequency if you
Configuring speakers (Sp Config menu)						want more sound from your subwoofer.

Note

Some of the settings in this section are made automatically by the Audyssey 2EQ® Room Correction and setup function. See “Using the Audyssey 2EQ® room correction and speaker setup” on page 12.

Using the Double Bass setting (Double Bass submenu of Sp Config menu)

Lets you boost bass output by feeding bass sounds from the front left, right, and center channels to the subwoofer. Optional settings are On and Off.

This section explains how to specify which speakers						Note
							This function can only be set if the Subwoofer
are connected and defines their sizes.
							setting is Yes, and the Front setting is Large. This
For speakers with a cone diameter larger than 6.5							setting is not made by Audyssey 2EQ®.
inches (16 cm), specify Large (full band). For those
				Setting speaker distance (Sp Distance menu)
with a smaller diameter, specify Small (default
crossover 120Hz).
The crossover frequency can be changed in the						Note
Crossover submenu.							This setting is made automatically by the Audyssey
							2EQ® Room Correction and setup function. See
	Note						“Using the Audyssey 2EQ® room correction and
		Speaker Configuration, Crossover Frequency, and					speaker setup” on page 12.
		Double Bass settings are disabled while headphones			Lets you specify the distance from each speaker to
		are connected, or when Audio TV OUT is set to On.
					the listening position so that the sound from each
					speaker arrives at the listener’s ears as the sound
Speaker(s)			Configuration
					designer intended.
Subwoofer			Yes–if a subwoofer is connected.
					Option			Configuration
			No–if no subwoofer is connected.
								Feet (default)–Distances can be set from 1 to 30
			Small–If speaker cone is 6.5 inches (16 cm) or less in
			diameter.		Unit			feet, in one foot increments.
								Meters–Distances can be set from 0.3 to 9.0 meters,
Front			Large–If speaker cone is larger than 6.5 inches (16 cm)
			in diameter.					in 0.3 meter increments.
			Note: If the Subwoofer setting is No, the default setting		Left, Center, Right,			Specify the distance from each speaker to your
			for this is Large and cannot be changed.		Surround Right, Surround			listening position.
			Small–If speaker cone is 6.5 inches (16 cm) or less in		Left, Subwoofer
			diameter.
			Large–If speaker cone is larger than 6.5 inches (16 cm)
Center and Surround			in diameter.
						Notes
			None–If no center speaker is connected.
							• The speaker distance setting is disabled while
			Note: If the Front setting is Small, the Large option
							headphones are connected, or when Audio TV
			cannot be selected. When Speakers B is On, these
							OUT is set to On.
			speakers output no sound.
							• Speakers that you set to No or None in the
							speaker configuration (Sp Config menu) cannot
Setting the crossover frequency (Crossover Frequency							be selected.
							• The Center, Right, and Subwoofer distances can
submenu of Sp Config menu)							be set up to 5 ft. (1.5 m) more or less than the
This setting is recommended for the speakers that							Left distance. For example, if the Left distance is
							set to 20 ft. (6 m), the Center, Right, and
you specify as Small. To get the best bass							Subwoofer distances can be set between 15 and
performance from your speaker system, you need							25 ft. (4.5 and 7.5 m).
to set the crossover frequency according to the size							• The Surround distances can be set up to 5 ft.
and frequency response of your speakers. Options							(1.5 m) more or 15 ft. (4.5 m) less than the Left
include 40Hz, 50Hz, 60Hz, 80Hz, 100Hz, 120Hz,							distance. For example, if the Left distance is set
150Hz, and 200Hz.							to 20 ft. (6 m), the SurrRight and SurrLeft
							distances can be set between 5 and 25 ft. (1.5
							and 7.5 m).
20
			www.insigniaproducts.com