Insignia 29400403A Selecting a digital input signal format, PCM, Auto, HDMI, Analog, HDMI IN, HDMI IN, HDMI OUT, Setting the A/V Sync, Setting the Audio Selector

Insignia NS-HTIB51A 5.1 Channel Home Theater System

• DTS
				Notes
• DTS Neo:6 Cinema
					• If the beginnings of tracks from a PCM source
• DTS 96/24					are cut off, try setting the format to PCM.
• DTS-HD High Resolution					• If noise is produced when fast forwarding or
					reversing a DTS CD, try setting the format to
• DTS-HD Master
					DTS.
• DTS Express.					• The setting is stored individually for each input
					selector.
	Notes				• The setting is reset to Auto when you change
		The CinemaFILTER may not work with some input			the setting in the Audio Selector.
		sources.
			To select a digital input signal format:
Setting the Audio Selector
			1 Press RECEIVER, then press and hold AUDIO for
You can set priorities of audio output when there				about eight seconds. Auto appears on the
				display.
are both digital and analog inputs. Options include:
			2 Press or to select one of the following
• ARC–The audio signal from your TV tuner can
	be sent digitally to the HDMI OUT of the			options:
	receiver. With this selection, the TV’s audio can			• Auto–The format is detected automatically. If
	automatically be selected as a priority.			no digital input signal is present, the
• HDMI–This can be selected when HDMI IN				corresponding analog input is used instead.
	has been assigned as an input source. If both			• PCM–Only 2-channel PCM format input
	HDMI (HDMI IN) and digital audio inputs			signals are heard. If the input signal is not
	(COAXIAL IN or OPTICAL IN) have been			PCM, the PCM indicator flashes and noise may
	assigned, HDMI input is automatically			also be produced.
	selected.			• DTS–Only DTS (but not DTS-HD) format input
• COAX–This can be selected when COAXIAL IN
				signals is heard. If the input signal is not DTS,
	has been assigned as an input source. If both			the DTS indicator flashes and there is no
	coaxial and optical inputs have been assigned,			sound.
	coaxial input is automatically selected.
• OPT–This can be selected when OPTICAL IN
	has been assigned as an input source.
• Analog–The receiver always outputs analog
	signals.

Notes

•The setting is stored individually for each input selector.

•This setting can be made only for the input source that is assigned as HDMI IN, COAXIAL IN, or OPTICAL IN. If both HDMI (HDMI IN) and digital audio inputs (COAXIAL IN or OPTICAL IN) are assigned, HDMI input is selected as a priority by setting to ARC. To select the digital audio input, see “Setting up Digital Audio (Digital Audio menu)” on page 19.

•You can select ARC if you select the TV/CD input selector. But you cannot select it if you have selected Off in the Audio Return Ch setting.

Setting the A/V Sync

When using progressive scanning on your Blu-ray Disc/DVD player, you may find that the picture and sound are out of sync. With this setting, you can correct this by delaying the audio signals. Option settings are from 0 ms to 100 ms, in 10 ms steps.

Notes

•A/V Sync is disabled when the Direct listening mode is used with an analog input source.

•The setting is stored individually for each input selector.

Selecting a digital input signal format

The digital input signal formats are available only for the input sources that you have assigned a digital input jack.

Normally, the receiver detects the signal format automatically. However, if you experience any issues when playing PCM or DTS material, you can manually set the signal format to PCM or DTS.

www.insigniaproducts.com 25