Insignia
To program CD playback: | To erase a CD program: |
1 With the CD player in stop mode, press the M | 1 Press the stop button until MEMORY |
(memory) button. P:00 shows on the display | disappears from the display. The display |
indicating that no tracks have been | shows the information for the current disc in |
programmed. | the CD changer. |
| OR |
| 2 Open the disc tray by pressing the OPEN/ |
| CLOSE button. |
| OR |
| 3 Press FUNCTION to select another function. |
| FUNCTION |
2 Press the search/skip button to select the |
|
desired disc. The disc number shows in the |
|
display. | Playing programmed tracks |
| |
| Note |
| While playing programmed tracks, the search/skip |
| button can only be used to select tracks that have |
| been programmed. |
| Note |
| While playing programmed tracks, repeat play will not |
| work for all discs. |
3Press the search/skip button again to select the desired track. The track number shows after the disc number in the display.
4Press the M (memory) button again to store the disc and track in memory.
5Repeat steps 2 through 4 to program up to 19 additional tracks in memory.
Note
The same track can be selected more than once in the same program. (For example, you could set a program to play the same track 20 times.)
6To check the program, press the PLAY/ PAUSE button to start play, then press a search/skip button to make sure that the next programmed track plays.
1Press the PLAY/PAUSE button to start playback. Press during play to pause play, then press again to resume playing.
2Press a search/skip button to move to another programmed track.
Note
The memory entry (disc and track) that have been stored appear on the display in numerical order.
Maintaining your shelf system
Cleaning the player
•Wipe with a soft cloth. If the player is very dirty, dampen the cloth with a weak solution of neutral detergent and water, and then wipe clean. Do not use compressed air to remove dust.
Caring for CDs
•Do not touch the surface of the unlabeled side of the disc.
•Do not attach paper or tape to the surface of the disc.
•Do not expose the disc to direct sunlight or excessive heat.
•Do not use irregularly shaped discs (for example: heart shaped or octagonal discs). They may cause malfunctions.
11 | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
