Insignia
Connecting speakers to the shelf system
Right speaker box
Left speaker box
Amplifier speaker conectors
AC power cord
To connect the speakers:
1Position the speakers supplied with the shelf system to the right and left of the shelf system.
Caution
Connecting speakers other than the speakers provided with the shelf system may damage the shelf system.
2Connect the wires from the speakers to the amplifier speaker connectors.
Connecting power to the shelf system
Note
Before operating the shelf system in a new area for the first time, you must check that the operating voltage of your shelf system is identical to the voltage of your local power supply. This shelf system is to be operated only at the power source voltage printed on the back panel. Disconnect from the power outlet when not in use for a long period of time.
To connect the power cord:
1Make sure that the speakers are properly connected and that the ON/OFF button is set to OFF.
2Connect the AC power cord to an AC outlet.
Connecting the antenna
To connect the antenna:
1Fully unwind the FM wire antenna. Extend the antenna and move it to determine the best sound reception.
Note
Do not connect the shelf system’s FM antenna to an outside antenna.
2Connect the provided AM loop antenna to the AM LOOP ANTENNA snap terminals on the back of the shelf system, then move it to determine the best sound reception.
Connecting external equipment
You can connect external audio systems to the shelf system.
To connect external equipment:
1Make sure that the power on the shelf system is off.
2Plug the jack from the external equipment into the aux in jack (with the music note symbol) on the front panel.
Connecting headphones
To connect the headphones:
1Turn down the volume on the shelf system.
2Plug headphones with a 3.5 mm stereo mini plug into the headphone jack.
Note
When the headphones are connected, the speakers on the shelf system are automatically disabled.
Using your shelf system
Turning the shelf system on and off
The display changes according to the button pressed or feature selected.
To turn the shelf system on and off:
1When the shelf system is off, press the ON/ OFF button on the shelf system once to turn it on. The display shows d1 and turns on the display backlight.
2When the shelf system is on, press the ON/ OFF button on the shelf system once to turn it off. The display backlight goes out.
When the shelf system is turned off, the clock still shows on the display without a backlight. This is called the standby mode.
Note
Disconnect the power cord when the unit is not going to be used for a long time.
Listening to external equipment
To listen to external equipment:
1Press the ON/OFF button on the shelf system once to turn it on.
2Press the Function button on the front panel to Aux, indicated by a music note symbol on the display.
3Turn on the external equipment.
Note
If the external equipment is a television and this shelf system is close to the TV, you may experience interference if the tuner function is selected while the TV is on.
7 | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
