Insignia
Preset tuning | 3 Press the open/close button to open the disc | |
The system stores a total of 40 stations. (Each | tray. | |
band has a maximum of 20 available preset |
| |
stations.) Presetting allows you to tune into a |
| |
station directly. Stations are assigned preset |
| |
numbers, beginning from 1 in consecutive order |
| |
for each band (AM and FM). |
| |
To program preset radio stations: |
| |
1 Manually select a radio station (see page 8). | 4 Load the first disc into the disc tray, label side | |
2 Press the memory button to store the station | ||
up. | ||
in memory. | ||
|
3 Repeat steps 1 and 2 to preset up to 20 AM
and 20 FM stations. |
| |
Recalling a preset station | 5 Press the disc skip button to revolve the disc | |
| ||
To recall a preset radio station: | tray clockwise. Repeat to load up to five discs | |
in the CD changer. | ||
|
1Press the ON/OFF button on the shelf
system once to turn it on.
2 Press the FUNCTION button to tuner mode, which is shown by the radio frequency indicator on the display.
3 Press the BAND button to select the band |
| |
| (AM or FM), which is shown by the band |
|
| indicator on the display, then tune a station. | 6 Press the open/close button to close the disc |
|
| |
| Note | tray. There will be a slight delay while the CD |
| changer checks the discs. | |
| In FM mode, the stereo indicator lights when |
|
| reception is good. |
|
|
|
|
Note
After changing the band or turning the radio off and on again, the last station selected is recalled.
4Press the skip/search/preset button until the
desired number for the preset station shows | Playing CDs |
on the display. |
|
FUNCTION |
To play CDs:
1Press the disc skip button to select the desired disc, then press either of the skip/ search/preset buttons to select a track on the selected disc. The selected disc flashes on the display.
Note
The memory entry (channel number, frequency band, and frequency) that have been stored appear on the display in numerical order, regardless of the frequency band.
Using the CD changer
Loading CDs
To load CDs in the changer:
1Press the ON/OFF button on the shelf system once to turn it on.
2Press the FUNCTION button to CD mode, which is shown on the display.
Note
The disc tray can be opened during playback to change or add a disc not in play. While the tray is open, the selected disc will not stop playing, but the disc skip button will not work to select another disc.
2Press the PLAY/PAUSE button to start playback. Press during play to pause play, then press again to resume playing.
9 | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
