Insignia NS-A1111 manual Locating tracks, Repeating a track or disc, Programming CD tracks

NS-A1111_final_translationDTP.fm Page 10 Friday, February 17, 2006 12:09 PM

			Insignia NS-A1111 5-CD Shelf System
	3 Press the stop button to stop playback.		2 To repeat the entire disc that is playing, press
			Repeat on the remote control until the
		Note	display shows REPEAT and rd (indicating a
		Before transporting the unit, remove any disc from	disc repeat). The currently playing disc will
		the disc compartment.	play repeatedly from the current playing
Locating tracks			point.

Note

Searching and skipping can be done during playback or pause, but can only be done for the CD currently playing.

To skip to a track in sequence:

1To go to the beginning of the current or the preceding track, press the skip/search/preset reverse button once.

2To go to the beginning of the next track on the CD, press the skip/search/preset forward button once.

Note

The skip/search buttons can be used during this function but operate in the search mode only.

3To repeat all discs in the CD changer, press Repeat on the remote control until the display shows REPEAT and rA (indicating a all-disc repeat). The discs will play repeatedly from the current playing point.

Reverse skip Forward skip

To search for a point in a track:

1Press and hold the skip/search/preset reverse button to move backward at high speed. Release the button at the desired point.

2Press and hold the skip/search/preset forward button to move forward at high speed. Release the button at the desired point.

Reverse search Forward search

Repeating a track or disc

Repeat playback allows you to repeat the current track, an entire disc, or all discs in the CD changer.

You can use repeat playback during normal playback (playback mode), stop mode, or pause mode.

To repeat play during playback mode:

1To repeat a track that is playing, press Repeat on the remote control until the display shows REPEAT and r1 (indicating a track repeat). The currently playing track will play repeatedly until you press the STOP button.

Note

The skip/search buttons can be used during this function and operate normally.

4Press the search/skip buttons to use select another track on the selected disc, or use the disc skip button to play the first track of the newly selected disc.

5To cancel repeat play, press Repeat on the remote control until REPEAT disappears from the display.

To repeat play during stop or pause modes:

1While the CD player is stopped or paused, program the repeat play function as if the CD were in playback mode.

2From stop mode, press the PLAY/PAUSE button to begin repeat play. The currently playing disc will play from the beginning of the first track.

3From pause mode, press the PLAY/PAUSE button to begin repeat play. The currently playing disc will play from the point at which play was paused.

Programming CD tracks

The system stores a total of 20 tracks from all available discs in the disc tray. These tracks can be played in a preset order.

10 www.insignia-products.com