Insignia NS-AV511 Surround Sound Receiver

Initial Rocketboost setup3 Press or to select Send Wireless Audio,

Insert the RF-RBCARD into the Rocketboost Module

then press ENTER. The Send Audio menu opens.

 

 

Slot on the top of NS-AV511 receiver.

Send Audio

 

 

 

 

Front

< Enabled >

 

Surround

Enabled

 

Subwoofer

Enabled

[< >] to Enable/Disable

4 Press or to select the Sender you want (Front, Surround, or Subwoofer), then press or to Enable or Disable the selected sender.

Setting up your surround sound receiver to send audio to other Rocketboost receivers

Note

This is only required if you are using Rocketboost™ for your wireless surround sound, wireless subwoofer, or if you are sending the front left/right speaker audio signals to Rocketboost receivers in other rooms of your house.

To set up your surround sound receiver to send audio to other Rocketboost receivers:

1Press SETUP. The Setup Menu opens.

Setup Menu

1.HDMI Input

2.Component

3.Digital Audio

4.Sp Config

5.Sp Distance

6.Level Cal

7.Audio Adjust

8.Source Setup

9.Hardware

10.HDMI Setup

11.Rocketboost

2Press or to select 11. Rocketboost, then press ENTER. The Rocketboost menu opens.

Rocketboost

Send Wireless Audio

Listen to Wireless Audio

Connect to Wireless Network

Hub (Manager) Enable

SenderSignal Status

Front Enabled

Front is ON

Front Disabled

Front is OFF

Surround Enabled

Surround signal is ON

Surround Disabled

Surround signal is OFF

Subwoofer Enabled

Subwoofer signal is ON

Subwoofer Disabled

Subwoofer signal is OFF

 

 

Note

•The Front sender should be enabled if you want to send the front left/right audio signals to other Rocketboost receivers (for example Rocketboost headphones or Rocketboost receiver products in other rooms of your house.)

•We recommend that you do not enable channels that you will not be using.

Establishing communications with other Rocketboost products

Note

Every Rocketboost™ network must contain a device called a Hub, which directs network data traffic and helps devices join the network. The network can have only one hub. If you are setting up your network for the first time, choose one of your Rocketboost™ senders to be your hub. If you already have a Rocketboost™ network, then set the Hub (Manager) setting in to Disable.

To connect to a Rocketboost wireless network:

1Press the Power button on your surround sound receiver to turn it on.

2Press SETUP. The Setup Menu opens.

Setup Menu

1.HDMI Input

2.Component

3.Digital Audio

4.Sp Config

5.Sp Distance

6.Level Cal

7.Audio Adjust

8.Source Setup

9.Hardware

10.HDMI Setup

11.Rocketboost

12

www.insigniaproducts.com