Insignia NS-AV511 Maintaining, Troubleshooting, ON, AUDIO, RECEIVER, RECEIVER again

Insignia NS-AV511 Surround Sound Receiver

TV/DVD Combination		Maintaining
TV/DVD Combination
Dynex	12049, 12184	To clean this receiver, wipe with a soft, dry cloth. If
Emerson	11394, 11864, 11963, 33002	To clean this receiver, wipe with a soft, dry cloth. If
ESA	11963	the surfaces are extremely dirty, use a soft cloth
ESA	11963	dipped in a soap and water solution or a weak
Funai	11963	dipped in a soap and water solution or a weak
Funai	11963	detergent solution.
GFM	11963	• Never use alcohol, paint thinner, or benzine to
Insignia	11963, 12002, 12049, 12417	clean this receiver.
LG	11423	• Before using a chemically treated cloth, read the
Magnavox	11963	instructions that came with the cloth carefully.
Magnavox	11963	Troubleshooting
Polaroid	11523, 12002
RCA	12002, 12187
Sharp	10818	If a problem occurs, run through the following table
Sylvania	11394, 11864, 11963, 33002	If a problem occurs, run through the following table
Sylvania	11394, 11864, 11963, 33002	before contacting Insignia.
Toshiba	11524, 12006	If the problem persists, attempt to solve it by
		switching the receiver off and on again. If this fails
		to resolve the problem, contact Insignia. Under no
		circumstances should you attempt to repair the
		receiver yourself as this could void the warranty.
		To reset the receiver to its factory defaults, turn it on
		and, while holding down VCR/DVR, press ON/
		STANDBY. Clear appears on the display and the
		receiver enters Standby mode.
		On the receiver
		Note that resetting the receiver will delete your radio presets and custom settings.
		To reset the remote control to its factory defaults,
		while holding down RECEIVER, press and hold
		down AUDIO until the Remote indicator lights
		(about three seconds). Within 30 seconds, press
		RECEIVER again.
		Remote indicator
		Remote indicator

RECEIVERRECEIVER button

HOME button

HOME

Notes

• The receiver contains a microcomputer for signal processing and control functions. In rare situations, severe interference, noise from an external source, or static electricity may cause it to lockup. If this happens, unplug the power cord from the wall outlet, wait at least five seconds, and then plug it back in again.

• Insignia is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by the unit’s malfunction.

• Before disconnecting the power cord from the wall outlet, set the receiver to Standby.