Insignia NS-AV511 Selecting a digital input signal format (Fixed Mode), Preprogrammed remote control codes, Off, PCM, DTS, •On, •On, Off, •Off, •Off, HOME, DISPLAY, RECEIVER

Insignia NS-AV511 Surround Sound Receiver

Selecting a digital input signal format (Fixed Mode)

The digital input signal formats are available only for the input sources that you have assigned a digital input jack.

Normally, the receiver detects the signal format automatically. However, if you experience any issues when playing PCM or DTS material, you can manually set the signal format to PCM or DTS.

Notes

•If the beginnings of tracks from a PCM source are cut off, try setting the format to PCM.

•If noise is produced when fast forwarding or reversing a DTS CD, try setting the format to DTS.

•The setting is stored individually for each input selector.

•The setting is reset to Off when you change the setting in the Audio Selector.

•Off–The format is detected automatically. If no digital input signal is present, the corresponding analog input is used instead.

•PCM–Only 2-channel PCM format input signals are heard. If the input signal is not PCM, the PCM indicator flashes and noise may also be produced.

•DTS–Only DTS (but not DTS-HD) format input signals is heard. If the input signal is not DTS, the DTS indicator flashes and there is no sound.

OSD Setting

Volume OSD

•On

•Off

Select On when you want to display the volume level on-screen when it is adjusted.

Auto Standby

•On

•Off

When Auto Standby is set to On, the Surround Sound Receiver automatically returns to Standby when no audio or video signal is received for 30 minutes.

Note

The Auto Standby function may activate during playback of some source.

Controlling other components

You can use your receiver’s remote control to control your other AV components. This section explains how to enter the remote control code for a component that you want to control, such as a DVD player, a TV, or a CD player. See “Remote control codes” on page 26.

Preprogrammed remote control codes

Remote control codes for Insignia Blu-ray disc players and Insignia TVs are preprogrammed into the remote control. You do not need to enter a remote control code to control these components.

To enter remote control codes:

1While holding down the REMOTE MODE button to which you want to enter a code, press and hold down the DISPLAY button until the Remote indicator lights up (about three seconds).

2Within 30 seconds, press the number buttons to enter the 5-digit remote control code. The Remote indicator flashes twice.

To reset a REMOTE MODE button:

1While holding down the REMOTE MODE button that you want to reset, press and hold HOME until the Remote indicator lights (about three seconds).

2Within 30 seconds, press the REMOTE MODE button again.

The Remote indicator flashes twice, indicating that the button has been reset.

Each REMOTE MODE button is preprogrammed with a remote control code. When a button is reset, its preprogrammed code is restored.

To reset the remote control:

1While holding down the RECEIVER button, press and hold HOME until the Remote indicator lights (about three seconds).

2Within 30 seconds, press the RECEIVER button again.

3The Remote indicator blinks twice, indicating that the remote control has been reset.

To control other components:

•Press the REMOTE MODE button that you have programmed with the remote control code for your component.