Insignia NS-AV511 Surround Sound Receiver

 

 

The Center Width setting lets you adjust the width

Setting up HDMI (HDMI Setup menu)

 

 

of the sound from the center speaker when using

 

 

 

 

 

 

the Dolby Pro Logic II Music listening mode.

 

Submenu

Configuration

 

 

 

Normally, if you’re using a center speaker, the center

 

 

 

 

 

 

 

 

Off (default)–CEC disabled.

 

 

channel sound is output by only the center speaker.

 

CEC Function

 

 

 

On–CEC enabled.

 

 

(If you’re not using a center speaker, the center

 

 

 

 

channel sound is distributed to the front left and

 

 

Off (default)–HDMI Through is off.

 

 

 

right speakers to create a phantom center). This

 

 

Auto–Detects the signal and automatically selects

 

 

 

setting controls the front left, right, and center mix,

 

 

the input source.

 

 

 

allowing you to adjust the weight of the center

 

HDMI Through

BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, TV/CD–

 

 

 

channel sound.

 

Selects the input source for which the HDMI Through

 

 

 

 

 

 

 

 

 

 

 

 

function is enabled.

 

 

 

Submenu

Configuration

 

 

 

 

 

 

 

 

Last–The HDMI Through function is activated on the

 

 

 

Panorama

On– Turns the Panorama function on.

 

 

input source selected when the AV receiver is set to

 

 

 

 

 

Standby mode.

 

 

 

Off–Turns the Panorama function off.

 

 

 

 

 

 

 

 

 

Audio TV OUT

Off (default)–HDMI audio is not output.

 

 

 

 

 

 

 

 

 

 

 

 

Dimension

–3 to 0 to +3

 

 

 

 

 

 

On–HDMI audio is output.

 

 

 

 

 

 

 

 

 

 

 

 

 

Center Width

0 to 3 to 7

 

 

Off–Select if you don’t want to use audio return

 

 

 

 

 

 

 

 

 

 

 

Audio Return Ch (ARC)

channel (ARC) function.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Auto (default)–The audio signal from your TV tuner

 

Setting the DTS options (Center Image submenu)

 

 

can be sent digitally to the HDMI OUT of the receiver.

 

 

LipSync

On (default)–Lip sync enabled.

 

 

The DTS Neo:6 Music listening mode lets you create

 

 

 

 

Off–Lip sync disabled.

 

 

6-channel surround sound from 2-channel stereo

 

 

 

 

 

 

 

 

 

 

 

 

sources. With this setting, you can specify by how

 

 

 

 

 

 

much the front left and right channel output is

CEC Function (HDMI Control submenu)

 

 

attenuated in order to create the center channel.

 

 

 

 

A value 0 is only audible from the center speaker. A

This function lets CEC-compatible components

connected via HDMI to be controlled by the

value of more than 0 is audible from the left and

receiver.

right speakers as well.

 

Submenu

Configuration

Center Image

0 to 2 (default) to 5

 

 

Adjusting the Theater-Dimensional setting (Listening Angle submenu)

This setting lets you optimize the Theater-Dimensional listening mode by specifying the angle of the front left and right speakers relative to the listening position. Ideally, the front left and right speakers should be equidistant from the listening position and at an angle close to one of the two available settings.

Notes

•When set to On, the name of connected CEC-compatible components and CEC On are displayed on the receiver when the menu is closed.

•When set to Off, CEC Off is displayed on the receiver when the menu is closed.

•When a CEC-compatible component is connected to the receiver via HDMI cable, the name of the connected component is displayed on the receiver. For example, when you are watching TV, if you turn on a Blu-ray Disc/DVD player by the receiver’s remote control, the name of the Blu-ray Disc/DVD player is displayed on the receiver.

•Set to Off when a connected piece of equipment is not compatible or it is unclear whether the equipment is compatible or not.

•If movement is unnatural when set to On, change the setting to Off.

•Refer to the connected component’s instruction manual for details.

20°/40°

SubmenuOptions

HDMI Through

•Off (default)–HDMI Through is off.

•Auto–Detects the signal and automatically selects the input source.

•BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, TV/CD– Selects the input source for which the HDMI Through function is enabled.

•Last–The HDMI Through function is activated on the input source selected when the AV receiver is set to Standby mode.

Listening Angle

Wide (default)–The listening angle is 40 degrees. Narrow–The listening angle is 20 degrees.

22

www.insigniaproducts.com