Insignia NS-AV511 Surround Sound Receiver

3Press or to select 11. Rocketboost, then press ENTER. The Rocketboost menu opens.

•When successfully joined, the power indicator LED on your other Rocketboost device will stop blinking and stay on.

Rocketboost

Send Wireless Audio Listen to Wireless Audio Connect to Wireless Network Hub (Manager) Enable

•If joining fails after 30 seconds, the display on your surround sound receiver shows “Timeout.” If this occurs, repeat the above steps.

Listening to music from other Rocketboost™ productsTo listen to music:

1Press the Power button on your surround sound receiver to turn it on.

2Press SETUP. The Setup Menu opens.

4Press or to select Hub (Manager), then

press ENTER, then press or to select Enable or Disable.

If you are setting up your network for the first time, choose one of your Rocketboost senders to be your hub. If you want the surround sound receiver to be the hub then set the Hub (Manager) setting in this menu to Enable.

Hub Enable

Hub Status

< Enabled >

[< >] to Enable/Disable

If you already have a Rocketboost network established, set the Hub (Manager) setting in this menu to Disable.

5Press RETURN to go to the previous menu.

Note

Every new Rocketboost device you add to your Rocketboost network must be “joined” to your Rocketboost hub device. If the surround sound receiver is the Hub of your network then repeat the following steps for each of your Rocketboost devices on your network.

6If possible, bring your existing Rocketboost Hub device, or the new Rocketboost device to which you’d like to join, into the same room as the soundbar.

7Press the Power button on your other Rocketboost device to turn it on.

8Press and hold the Power button on your other Rocketboost device for more than three seconds to put it into joining mode. The power indicator starts blinking rapidly and the unit will stay in joining mode for 30 seconds.

9Press or to select Connect to Wireless Network, then press ENTER.

10The display on your surround sound receiver shows “Connecting.” When connected to your other Rocketboost device, the display shows “Connected.”

Setup Menu

1.HDMI Input

2.Component

3.Digital Audio

4.Sp Config

5.Sp Distance

6.Level Cal

7.Audio Adjust

8.Source Setup

9.Hardware

10.HDMI Setup

11.Rocketboost

3Press or to select 11. Rocketboost, then press ENTER. The Rocketboost menu opens.

Rocketboost

Send Wireless Audio

Listen to Wireless Audio

Connect to Wireless Network

Hub (Manager) Enable

4Press or to select Listen to Wireless Audio, then press ENTER. The Listen to Audio menu opens.

Listen to Audio

RF-RBAUX(Audio In) [Selected]

[ENTER] to Select

5Press or to highlight the Rocketboost device you want to listen to, then press ENTER to select it.

www.insigniaproducts.com

13