Insignia NS-AV511 Surround Sound Receiver

Listening Mode

Description

Input Source

Speaker Layout

Full Mono

In this mode, all speakers output the same sound in mono, so the sound you hear is the same regardless of where you

MONO

3.1, 5.1

are within the listening room.

STEREO

 

(Full Mono)

 

5.1ch

 

 

 

7.1ch

 

T-D (Theater-

With this mode you can enjoy a virtual surround sound even with only two or three speakers. This works by controlling

MONO

2.1, 3.1, 5.1

how sounds reach the listener’s left and right ears. Good results may not be possible if there is too much reverb, so we

STEREO

 

Dimensional)

 

recommend that you use this mode in an environment with little or no natural reverb.

5.1ch

 

(T-D)

 

 

7.1ch

 

 

 

 

 

 

 

 

Speaker layout

The following shows the speakers that are activated in each type of configuration.

2.1ch

3.1ch

5C.1ch

a b

c

d

a - Front speakers b - Center speaker c - Subwoofer

d - Surround speakers

Using advanced setup

Using on-screen setup menus

On-screen setup menus appear on the connected TV and provide a convenient way to change the receiver’s various settings. Settings are organized into nine categories on the main menu.

You can change the settings by using the on-screen display.

To use the on-screen setup menus:

1Press RECEIVER, then press SETUP. The Setup menu opens.

Setup Menu

1.HDMI Input

2.Component

3.Digital Audio

4.Sp Config

5.Sp Distance

6.Level Cal

7.Audio Adjust

8.Source Setup

9.Hardware

10.HDMI Setup

11.Rocketboost

Tip

If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

5Press RETURN to return to the main menu.

Tip

You can also performed these changes on the receiver by pressing SETUP, the arrow buttons, then

ENTER.

Setting up HDMI input (HDMI Input menu)

If you connect a video component to HDMI inputs, you must assign that input to an input selector. For example, if you connect your Blu-ray Disc/DVD player to HDMI IN 2, you must assign HDMI2 to the BD/DVD input selector.

Here are the default assignments:

Input selector

Default assignment

BD/DVD

HDMI1

 

 

VCR/DVR

HEMI 2

CBL/SAT

HDMI3

 

 

GAME

HDMI4

AUX

------

 

 

TUNER

------

TV/CD

------

 

 

HDMI1, HDMI2, HDMI3, HDMI4–Select the HDMI input to which the video component has been connected.

-- - - -–Select if you’re not using the HDMI OUT.

2Press or to select a menu, then press

ENTER.

3Press or to select an option, then press

or to change the setting.

4Press SETUP to close the menu.

20

www.insigniaproducts.com