Insignia NS-BRDVD 23

Insignia NS-BRDVD Blu-ray Disc Player

Adjusting the component resolution

To adjust the component resolution:

1In stop mode, press SETUP.

2Press or to select , then press ENTER. The Custom menu opens.

Custom

3Press or to select VIDEO, then press ENTER. The Video menu opens.

4Press or to Component Output, then press ENTER repeatedly to select a resolution.

5Press SETUP to close the menu.

Selecting the audio CD audio mode

To select the audio CD audio mode:

1During playback, press AUDIO repeatedly to select:

•Stereo—Both right and left audio channels are active.

•L-ch—Only the left audio channel is active.

•R-ch—Only the right audio channel is active.

2Press AUDIO to close the menu.

Note

Selecting audio streams or channels is not available for DTS-CD (5.1 music disc).

Setting the Blu-ray audio mode

	Audio recording	HDMI Audio Out setting
Disc type	Audio recording
Disc type	format	HDMI Multi	HDMI Multi
		(Normal)	(LPCM)

Blu-ray	Dolby Digital	Dolby Digital1	Multi LPCM
	Dolby Digital Plus	Dolby Digital	Multi LPCM2
		Plus1
	Dolby TrueHD	Dolby TrueHD1	Multi LPCM3
	DTS	DTS1	Multi LPCM
	DTS-HD	DTS-HD1	Multi LPCM4
	LPCM	Multi LPCM	Multi LPCM

DVD	Dolby Digital	Dolby Digital	Multi LPCM

	DTS	DTS	Multi LPCM

	LPCM	Multi LPCM	Multi LPCM

Audio CD,		2-channel	2-channel
MP3, WMA		LPCM	LPCM

DTS-CD		DTS	Multi LPCM

Notes

1If the BD Audio Mode option is set to Mix Audio Output, audio is output as multi LPCM.

2Outputs audio signals decoded from an independent substream.

3Outputs audio signals decoded from the Dolby Digital stream.

4Outputs audio signals decoded from the DTS core stream.

If the connected device is not compatible with the HDMI BITSTREAM, audio will be output as multi LPCM or 2-channel down-mixed LPCM depending, on the capability of the connected device, even if you set the HDMI Audio Out option to HDMI Multi (Normal).

When you select Audio Mute, audio signals from the HDMI OUT jack are muted and the signals are sent to the DIGITAL OUT jack.